SM-8 Preset Switch [PB08]
SM-8 Preset Switch [PB08]
What is it?
The Donner Wireless DMX512 Dongles allow for 3 PIN DMX512 devices to be connected over wireless 2.4GHz. They are rechargeable and support 500 Meters open air. 1 Dongle acts as the Master TX (has antenna) while the others act as RX
How if functions in our network?
The Springtree SM-8 is used to control Universe 1 when no input is detected. It can store 8 preset cues and recall them at the push of a button. There is 1 master switch in upper booth, and multiple stations around the auditorium. Only the master can record cues, and without a master, stations won't work
Status Identification
Blue - No Input (Cue is active)
Green - No Input (Record is ready)
Purple - Input Bypass (No Cue is active)
Red - Input Record (Recording)
Troubleshooting
Hold down buttons 1 & 8 to take in and out of record mode. While the board is on and the light is purple, hold down 1 & 8 on the switch. Set the look how you want it on the board, and press the preset number to record to on the switch. Hold 1 & 8 again to save the cue
There should be no issues with this device. If so, talk to Jonah